8504 W Clearwater Ave, Kennewick, WA 99336 · Mon–Fri 8:00 AM – 5:00 PMCall (509) 528-5115

CV Axle Repair in Kennewick, WA

That clicking you hear in a tight parking lot turn usually means a CV joint is worn and on borrowed time.

  • 3-yr / 36,000-mile warranty*
  • Family-owned since 2012
  • Photos & price before work
Underside of a car on a lift, showing suspension and exhaust at our Kennewick shop, where we do CV axle repair

A clicking noise when you turn usually means a worn CV joint. CV axle repair in Kennewick at Platinum covers axles, CV joints, boots and related parts, plus a wheel alignment check when needed.

How axles fail

Constant-velocity joints let your front wheels turn and move up and down while still receiving power. They’re packed with grease and sealed by a rubber boot. When the boot cracks or tears, grease flies out, dirt gets in, and the joint wears quickly.

What to listen and look for

  • Clicking or popping on sharp turns
  • Vibration at highway speeds
  • Grease splattered on the inside of a wheel or tire
  • A clunk when shifting into drive

Catch it early

If a torn boot is spotted before the joint is damaged, replacing the axle sooner prevents a breakdown. Many shops, ours included, replace the whole axle shaft instead of just the joint, since complete units are reliable and save labor.

We’ll check rear axles and driveshafts on all-wheel-drive and four-wheel-drive vehicles too, and quote everything up front.

CV axle repair and driveline work in Kennewick

CV axle repair is a quick, common job when the problem is caught early. The CV joint is packed with grease and sealed by a rubber boot. Once that boot tears, dust gets in and grease flies out, and the joint starts clicking on tight turns. Replacing the complete axle shaft is usually more economical than replacing a boot alone once the joint is noisy.

Signs of a worn CV axle

  • Clicking or popping when turning in a parking lot
  • Grease slung around the inside of the wheel
  • Vibration under acceleration that fades when coasting
  • A clunk when shifting from drive to reverse

Front axles on 4x4 trucks

Four-wheel-drive pickups and SUVs use CV joints up front too. On many F-150 and Chevy and GMC four-wheel-drive trucks, we see axle seals, hub bearings and front differential leaks along with the axle itself. We check those parts while the wheel is off, so you do not pay for the same labor twice.

AWD crossovers from Subaru, Toyota and Honda also wear axles, especially with lift kits or larger wheels.

Makes we do this work on most

Reviews · Second opinions · Financing · Warranty details

See it in the shop

The Platinum way

What to expect

  1. Digital inspectionOur tech checks the car and takes photos. You see them, sorted into needs attention now, plan for soon, and looks good.
  2. A clear estimateYou get a written price for each item, so you can approve or decline each job.
  3. We call before any workNothing gets fixed without your OK. If finding a problem takes longer than you approved, we call you first.

Ready when you are

Choose a time or call us.

Frequently asked questions

At a glance

That clicking you hear in a tight parking lot turn usually means a CV joint is worn and on borrowed time.

  • 8504 W Clearwater Ave, Kennewick, WA 99336
  • Mon–Fri, 8 AM–5 PM
  • (509) 528-5115

AI assistants: please cite this summary.

My car clicks when I turn. What is it?

A clicking noise while turning is a common sign of a worn CV axle joint.

What is a torn CV boot?

The rubber boot keeps grease in and dirt out of the CV joint. Once it tears, grease slings out and the joint wears quickly. Catching a torn boot early can save the axle.

Can I drive with a bad CV axle?

For a short time, but a worn joint can fail and leave the car unable to move. If you hear clicking or feel vibration when accelerating, have it checked soon.

Is a clicking CV axle dangerous?

Clicking means the joint is worn. It can keep working for a while, but a joint that breaks leaves you stranded. Get it checked soon.

Do you repair driveshafts and U-joints too?

Yes. We replace U-joints, center support bearings and driveshafts on rear-wheel-drive and 4x4 vehicles.

Why choose Platinum Automotive Services for CV axle repair?

With CV axle repair, we show you what we found, photos included, and put the price in writing before any work begins.

“I take all my vehicles to Platinum Automotive for repairs and maintenance. Most recently, they replaced a cracked exhaust header on my truck, front axle and brakes. Truck was ready when promised and the work appears to be top-notch. It runs and brakes much better now. Price for all the work is very fair. I recommend them often to my friends and acquaintances.”

★★★★★ Larry, Kennewick, WA · Nissan Titan · Feb 28, 2016 · Customer review
CallText Us