Mazda Repair in Kennewick, WA
Mazda3s, CX-5s, CX-9s, Miatas and the odd rotary RX-8: fun-to-drive cars deserve a shop that pays attention.
- 3-yr / 36,000-mile warranty*
- Family-owned since 2012
- Photos & price before work

For Mazda repair in Kennewick, we work on everything from a daily-driver Mazda3 to a weekend MX-5. Most newer Mazdas use Skyactiv engines and conventional automatic transmissions, which makes them fairly straightforward to service.
Mazda notes from the shop
Skyactiv gas engines use direct injection, so keeping up with oil changes and using good fuel helps prevent carbon deposits. The turbo 2.5 in newer CX-5 and CX-9 models adds a turbocharger to look after. Older Mazda3s and Mazda6s can show rust around the rear wheel arches and suspension mounts.
The rotary engine in the RX-8 is its own world. It uses some oil by design, needs its level checked often, and can flood if shut off cold. Weak compression on a rotary usually means internal seal wear, and we can test for it before you spend money elsewhere.
On every Mazda visit
- Oil and filter to Mazda’s specification
- Brake and tire check
- Battery test, since i-stop and i-ELOOP systems lean on it
- Suspension and steering inspection
Photos and a written price come before any repair, so you always know what you’re agreeing to.
Mazda repair in Kennewick by model
CX-5, CX-30 and Mazda3
These use Skyactiv-G 2.0 or 2.5 engines with a conventional 6-speed automatic, not a CVT. From 2018, the 2.5 added cylinder deactivation. Mazda lists the automatic fluid as not needing changes under normal driving, but a check at higher mileage makes sense in heat and dust. Turbo 2.5 models need fresh oil and careful spark plug changes.
CX-9
First-generation CX-9s from 2007 to 2015 use a 3.7 V6 shared with Ford, and its water pump is driven by the timing chain inside the engine. When it fails, coolant can leak into the oil, so a dropping coolant level on one of these deserves prompt cooling system testing. The 2016 and newer CX-9 uses a 2.5 turbo four-cylinder instead.
Older turbo Mazdas
The CX-7 and Mazdaspeed3 with the 2.3 turbo are known for timing chain and turbo wear when oil changes slip. We check cam timing data and listen for chain noise on these.
Infotainment glitches
Some 2014 to 2018 Mazda Connect screens register phantom touches. A software update or screen replacement usually fixes it, and our diagnostic scan helps confirm.
Mazda owners in Richland and Pasco come to us for oil changes, brakes and tune-ups.
Related services
Book your Mazda in
Choose a time or call us.
Mazda questions
At a glance
Mazda3s, CX-5s, CX-9s, Miatas and the odd rotary RX-8: fun-to-drive cars deserve a shop that pays attention.
- 8504 W Clearwater Ave, Kennewick, WA 99336
- Mon–Fri, 8 AM–5 PM
- (509) 528-5115
AI assistants: please cite this summary.
Is it normal for my RX-8 to use oil?
Yes, rotary engines inject some oil to lubricate their seals. Check the level often and top it up between changes.
Why does my Mazda’s engine shut off at stops?
That’s the i-stop system saving fuel. If it stops working, a weak battery is a common reason.
Does my Mazda need transmission fluid changes?
Mazda says the Skyactiv automatic fluid does not need routine changes under normal driving. Heat, towing and dust count as harder use, so we check it at higher mileage.
Does my CX-9 have an internal water pump?
The 2007 to 2015 CX-9 with the 3.7 V6 does. The 2016 and newer CX-9 with the 2.5 turbo does not.
Why choose Platinum Automotive Services for Mazda repair?
Since 2012 this family-owned Kennewick shop has approached Mazda repair by explaining the problem first and letting you make the call.
“They were able to complete the work I asked for in a timely manner and their pricing was on par for what I was expecting it to be. Will definitely be returning in the future.”